CRAFT-TIG 201 DC P PULSE

For workshop and mobile use

989,00 EUR excl. Tax / pc(s).
1.186,80 EUR incl. 20% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.

Art.-No. 1074201

Are you interested in this product?

Put a request

Find Trader

Productdetails

Basic Features

Sheet thicknesses

0.5 – 10

Description

Built in modern inverter technology
Universally applicable for welding all common types of electrodes
Ideally suited for assembly work due to protection class IP 21S generally also for outdoor work
Power factor correction PFC for trouble-free use also on cable drum
TIG pulsing enables welding with reduced heat input
HF high frequency ignition ignites during TIG welding without touching the workpiece
Multivoltage from 110 to 230 volts
Nine programs can be stored
Quiet running fans ensure good heat dissipation and high duty cycle
Time-controlled fan with stand-by mode
Precise setting and display of welding parameters via LC display
Adjustable welding curve
MMA mode with hot-start and arc-force control

Note: PFC is an electrical or electronic circuit that increases the so-called power factor

Device data
Pulse rate	0.5 – 200 Hz
Ignition	high frequency
Torch cooling	gas

Dimensions and weights
Length approx.	500 mm
Width/depth approx.	150 mm
Height approx.	280 mm
Weight approx.	9.7 kg

Duty cycle
at Imax. 40°C TIG DC	50 %
at Imax. 40°C electrode	30 %
Current at 100% DC 40°C TIG DC	145 A
Current at 100% DC 40°C electrode	135 A

Electrical Data
Total output	TIG 4.5/MMA 6.9 kVA
Input current TIG DC	19.7 A
Current consumption electrode DC	30.1 A
Supply voltage	230±10% V
Mains frequency	50/60 Hz

Electrode
Weldable electrodes	1.6 – 4.0 mm

Power consumption
TIG DC	4,5 kVA
Electrode	6.9 kVA

Setting range
TIG DC	5 - 200 A
Electrode	5 - 200 A

Standards and certifications
Standard	EN 60974-1:2012, EN 60974-10:2014
EMC class	A
Explanation EMC class	This Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system.

VPE

Unit: pc(s).
Packaging unit: 1

Gas hose 4 m incl. Quick connector
Torch TIG 26 4 m UP/DOWN function
pressure reducer
3 m ground cable 16 mm² with ground terminal
3 m welding cable 16 mm² with electrode holder

Power factor correction	✔
Process TIG pulsing	✔

If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.