• Productimage for FOCUS.ARC P 300 W 0.8/1.0
  • Productimage for FOCUS.ARC P 300 W 0.8/1.0
  • Productimage for FOCUS.ARC P 300 W 0.8/1.0
  • Productimage for FOCUS.ARC P 300 W 0.8/1.0
  • Productimage for FOCUS.ARC P 300 W 0.8/1.0
  • Productimage for FOCUS.ARC P 300 W 0.8/1.0
  • Productimage for FOCUS.ARC P 300 W 0.8/1.0
  • Productimage for FOCUS.ARC P 300 W 0.8/1.0
  • Productimage for FOCUS.ARC P 300 W 0.8/1.0
  • Productimage for FOCUS.ARC P 300 W 0.8/1.0
Brandimage to Product FOCUS.ARC P 300 W 0.8/1.0

MIG/MAG impulse welders

FOCUS.ARC P 300 W 0.8/1.0

Simply better welding

8.177,40 EUR excl. Tax / pc(s).
9.812,88 EUR incl. 20% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.

Art.-No. 1047056

Are you interested in this product?
  • Put a request
  • Find Trader
  • Productdetails


    Improve performance, improve quality and protect health responsibly with the fully digitally controlled welding process FOCUS.ARC


    • Up to 50% more yield
    • More metres of welding wire per hour
    • Less rework
    • REHM potential analysis


    • Better visibility into the process
    • Better control over the arc
    • Fewer errors
    • Higher quality


    • Up to 70% reduced welding fume exposure
    • Elimination of exposure to protective welding spray
    • 80% less grinding dust exposure

    Digitally controlled welding processes for all applications:

    High-performance pulse welding process for steel construction

    • Directionally stable with adjustable heat input
    • Heat input reduced by 30%
    • Increase of deposition rate up to 60%
    • Welding with reduced seam opening angle
    • Significant improvement in quality
    • Over-weldable tackers
    • REHM creates an analysis of their yield potential for you

    Very well modulable welding process for steel, stainless steel and aluminium

    • Weld stainless steel faster with TIG-like seam surface
    • Hardly any tarnish, electrochemically removable
    • Adjustable heat input
    • Welds in TIG look with double pulse (shingling)
    • Overweldable tackers
    • Fully optimised to your special applications

    Spatter-free welding process for thin sheet and root welds

    • Very good gap bridging
    • Significantly increases welding speed for drop seams
    • Root welding, even with reduced seam opening angle and very good gap bridging
    • Safe penetration
    • No weld spatter

    Welding in unrivalled dimensions

    • Welding with short, powerful arc
    • Safe root detection
    • Particularly deep penetration
    • Safe flank detection
    • Reduced penetration notches

    SIRIUS user interface - the benchmark in welding equipment operation: future-proof, intuitive and open.

    More user-friendly

    • Simplifies the operation of complex digitally controlled processes
    • Graphically dynamic and transparent visualisation
    • Assist functions
    • Highest user acceptance

    More flexible

    • Fully Industry 4.0 capable
    • Easy integration into all systems/production chains/flows
    • Freely configurable interface


    • Load the REHM app and run it
    • Communicates with all networks and mobile devices
    • LAN and WLAN capable


    • New arc technology with faster flow rates
    • Digitally controlled welding processes
    • Innovative operating concept


    Cooling typeAF
    Torch coolingwater
    Dimensions and weights
    Length approx.650 mm
    Width/depth approx.330 mm
    Height approx.820 mm
    Weight approx.56 kg
    Duty cycle
    Duty cycle at Imax. 40°C80 %
    Current at 100% DC 40°C280 A
    Electrical Data
    Supply voltage400 V
    Mains frequency50 Hz
    Power consumption
    MIG/MAG11 kVA
    Setting range
    MIG/MAG20 – 310 A
    Standards and certifications
    EMC classA
    Explanation EMC classThis Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system.
    Wire feed
    weldable wires steel0.8 - 1.2 mm
    weldable wires stainless steel0.8 - 1.2 mm
    weldable wires aluminium0.8 - 1.2 mm
    Wire feet unit4 Rollers
    Unit: pc(s).
    Packaging unit: 1

    • Feed rollers 0.8/1.0 mm


    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.


    Optional parts

    Optional parts can not be retrofitted and are available only when ordering new machines.