Productimage for MEGA.ARC P 450 S
Brandimage to Product MEGA.ARC P 450 S

MIG/MAG impulse welder

MEGA.ARC P 450 S

Infinitely variable, for perfect MIG/MAG welding results

9.190,00 EUR excl. Tax / pc(s).
11.028,00 EUR incl. 20% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.

Art.-No. 1047187

Are you interested in this product?
  • Put a request
  • Find Trader
  • Productdetails

     

    Whether performance increase or quality improvement - with the fully digitally controlled welding processes FOCUS.ARC you secure all competitive advantages. FOCUS.ARC is not just a promise, it proves its performance. Because only the result counts - keep scrolling!


    Healthier

    • Elimination of exposure to welding protection spray
    • 80% less grinding dust exposure

    Faster

    • More metres of weld per hour.
    • Less rework

    Better

    • Better control over the arc
    • Fewer errors
    • Higher quality

    SIRIUS operator interface - The benchmark in welding equipment operation: future-proof, intuitive and open.


    More user-friendly

    • Simplifies the operation of complex digitally controlled processes
    • Graphically dynamic and transparent visualisation
    • Assist functions
    • Highest user acceptance

    More flexible

    • Fully Industry 4.0 capable
    • Easy integration into all systems/production chains/processes
    • Freely configurable interface

    POWER.PULS | MEGA.ARC P
    Very well modulable welding process for steel, stainless steel and aluminium

    • Weld stainless steel faster with TIG-like seam surface
    • Hardly any tarnish, electrochemically removable
    • Adjustable heat input
    • Welds in TIG look with double pulse (shingling)
    • Overweldable tackers
    • Fully optimised to your specific applications

    POWER.ARC | MEGA.ARC P/MEGA.ARC S
    Standard welding process

    • Quiet, stable arc
    • High arc stability
    • High-energy arc

    Advantages of REHM FOCUS welding processes*:

    Digitally controlled welding processes

    • Controlled droplet transition
    • Controlled short-circuit resolution
    • Controlled Heat input

    Reduction of rework

    • The amount of rework can be reduced up to 80% Increase in quality.
    • Better control over the arc
    • Fewer defects

    Improving health protection

    • Grinding dust loads are reduced by up to 80%
    • Welding protection spray loads can be reduced by up to 100%

    *Data only applies in conjunction with REHM FOCUS.PULS

    Digitally controlled welding processes for all applications

    POWER.PULS
    Very well modulable welding process for steel, stainless steel and aluminium

    • Weld stainless steel faster with TIG-like seam surface
    • Hardly any tarnish, electrochemically removable
    • Adjustable heat input
    • Welds in TIG look with double pulse (shingling)
    • Over-weldable tackers
    • Full optimisation to your special applications

    POWER.ARC
    Standard welding process

    • Quiet, stable arc
    • High arc stability
    • High-energy arc

    ROOT
    Spatter-free welding process for Thin sheet and root welds

    • Very good gap bridging
    • Significantly increases welding speed for drop welds
    • Root welding, even with reduced seam opening angle and very good gap bridging
    • Safe penetration
    • No weld spatter

    FOCUS.ARC
    Welding in unrivalled dimensions

    • Welding with a short, powerful arc
    • Safe root penetration
    • Particularly deep penetration
    • Safe flank penetration
    • Reduced penetration notches

     

    Cooling
    Cooling typeAF
    Torch coolingGas
    Dimensions and weights
    Length approx.650 mm
    Width/depth approx.330 mm
    Height approx.1100 mm
    Weight approx.60 kg
    Duty cycle
    Duty cycle at Imax. 40°C60 %
    Current at 100% DC 40°C400 A
    Electrical Data
    Supply voltage400 V
    Mains frequency50 Hz
    Power consumption
    MIG/MAG20,6 kVA
    Setting range
    MIG/MAG20 – 460 A
    Standards and certifications
    EMC classA
    Explanation EMC classThis Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system.
    Wire feed
    weldable wires steel0.8 – 1.6 mm
    weldable wires stainless steel0.8 – 1.6 mm
    weldable wires aluminium0.8 – 1.2 mm
    Wire feet unit4 Rollers
    VPE1
    Unit: pc(s).
    Packaging unit: 1

    • Feed rollers 1.0/1.2 mm

     

    Type of constructionwith wire feed case
    Volume gas cylinder max.50 l
    FOCUS.ARC
    ROOT
    POWER.PULS
    POWER.ARC

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.