• Productimage for OPTIturn TH 4610D
  • Productimage for OPTIturn TH 4610D
  • Productimage for OPTIturn TH 4610D
  • Productimage for OPTIturn TH 4610D
  • Productimage for OPTIturn TH 4610D
  • Productimage for OPTIturn TH 4610D
  • Productimage for OPTIturn TH 4610D
  • Productimage for OPTIturn TH 4610D
Brandimage to Product OPTIturn TH 4610D

Precision guide and drawbar turning machine

OPTIturn TH 4610D

unique in precision and operation. With digital position indicator DPA 31 Plus and quick-change steel holder

16.690,00 EUR excl. Tax / pc(s).
20.028,00 EUR incl. 20% Tax / pc(s).
Promotional price *
15.999,00 EUR excl. Tax / pc(s).
19.198,80 EUR incl. 20% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 28.02.2025 in Germany.

Art.-No. 3462110

Are you interested in this product?
  • Put a request
  • Find Trader
  • Productdetails

    • Hardened and ground Z-axis guideway
    • Guaranteed concentricity of the spindle nose ≤ 0.015 mm
    • Shafts, wheels and main spindle run in an oil bath
    • Lead screw cover
    • Precisely machined slide
    • All guides can be adjusted using gibs
    • Mechanical longitudinal feed cut-off of the bed slide with four adjustable eccentrics
    • Right/left rotation on the bed slide switchable via switching spindle
    • Two-channel safety electronics
    • Central lubrication in the bed slide
    • Upper slide adjustment range ± 90
    • Smooth-running gear wheels, hardened and ground, mounted on 2 adjustable precision tapered roller bearings
    • Switch with life cycle calculation, tested in accordance with EN ISO 13849
    • Large chip guard with integrated LED machine lamp
    • Handwheels with adjustable fine scaling 0.04 / 0.02 mm
    • Safety handwheels with disengagement function in accordance with EN23125 in the X and Z axes
    • High-speed feed gearbox in closed design, gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
    • Scale of the threaded clock adjustable
    • Tailstock for taper turning adjustable ± 10 mm
    • Tailstock quill and handwheel with adjustable fine scale 0.025 mm
    • Quick, easy and tool-free adjustment of the tailstock using a clamping lever
    • Cable routing via energy chain
    • Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
    • Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
    • Emergency stop device with foot actuation

     

    Cooling lubricant system
    Coolant pump output125 W
    Dimensions and weights
    Length approx.2215 mm
    Width/depth approx.1065 mm
    Height approx.1550 mm
    Weight approx.1645 kg
    Electrical Data
    Drive motor output5.5 kW
    Total rated value5.8 kW
    Supply voltage400 V
    Mains frequency50 Hz
    Feed
    Longitudinal feed range0,031 – 1,7 mm/rev
    Number of longitudinal feeds42
    Flat feed range0,014 – 0,784 mm/rev
    Number of flat feeds42
    Pitches
    Metric pitch0,1 – 14 mm/rev
    Number of metric pitches41
    Imperial pitch112 – 2 Gg/1"
    Number of imperial pitches41
    Diametrical pitch4 – 112 DPI
    Number of diametrical pitches50
    Modular thread pitch0,1 – 7 mm/rev
    Number of modular thread pitches34
    Speed range
    Number of gears12
    Speed range25 – 2000 min¯¹
    Spindle
    Spindle chuckCamlock DIN ISO 702-2 No. 6
    Spindle bore/rod passage diameter58 mm
    Tool holder max. chuck height25 mm
    Spindle coneMT 6
    Tailstock
    ChuckMT 4
    Quill stroke130 mm
    Quill diameter60 mm
    Travel
    Travel upper slide125 mm
    Travel cross slide285 mm
    Travel carriage saddle755 mm
    Work areas
    Max. height230 mm
    Max. width1060 mm
    Swing diameter above machine bed460 mm
    Swing diameter in bed bridge690 mm
    Swing diameter above planing slide270 mm
    Turning length in bed bridge240 mm
    Bed width300 mm
    VPE1
    Unit: pc(s).
    Packaging unit: 1

    • Fixed steady rest aperture Ø 25 - Ø 178 mm
    • Rotating steady rest aperture Ø 19 - Ø 114 mm
    • LED machine light
    • Adapter MK6-MK4
    • Non-rotating center point MK4
    • Non-rotating, but temperature-resistant center point MK4
    • Quick-change steel holder SWH 5-B
    • Steel holder 25 x 120 type D for square chisel 20 mm
    • Thread watch
    • Interchangeable gear set
    • Gearwheels for threading gauge (metric)
    • Initial machine filling with quality oil
    • Operating tool

     

    Digital position indicatorDPA 31 Plus

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.