OPTIturn TX 5216 - DPA 32-3

meets the highest requirements in terms of technical equipment and precision

26.195,00 EUR excl. Tax / pc(s).
31.434,00 EUR incl. 20% Tax / pc(s).

Promotional price *

25.499,00 EUR excl. Tax / pc(s).
30.598,80 EUR incl. 20% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 28.02.2025 in Germany.

Art.-No. 3432442

Are you interested in this product?

Put a request

Find Trader

Productdetails

Machine bed made of heavily ribbed cast iron
One-piece machine base made of steel
High rigidity of the headstock housing due to heavily ribbed 25GG casting
Precisely machined slide
Shafts on needle bearings, all components are lubricated in an oil bath
Bed guides hardened and precision ground
All electronic controls can be reached centrally
All gear wheels of the feed gear made of hardened steel
Handwheels decoupled and tested in accordance with EN 23125
Two-channel safety electronics
Switch with life cycle calculation, tested in accordance with EN ISO 13849
Complete lead and pull spindle cover
Complete illumination of the work area
Hardened and ground face spindle ensures enormous accuracy and durability
High chip removal during roughing is no problem thanks to the high cutting capacity
Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
Service-friendly removable rear panel
No change wheels necessary
With safety device to prevent simultaneous operation of tapping and feed mechanism
Electronically braked motor
Electronic feed cut-off of the Z-axis
Electrical position switch-off with quadruple position stop
Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
Three-jaw lathe chuck included as standard
Large spindle bore

Cooling lubricant system
Coolant pump output	100 W

Dimensions and weights
Length approx.	3016 mm
Width/depth approx.	1270 mm
Height approx.	2217 mm
Weight approx.	2470 kg

Electrical Data
Drive motor output	5.5 kW
Total rated value	6.1 kW
Supply voltage	400 V
Mains frequency	50 Hz

Feed
Longitudinal feed range	0,05 – 1,5 mm/rev
Number of longitudinal feeds	55
Flat feed range	0,025 – 0,75 mm/rev
Number of flat feeds	55

Pitches
Metric pitch	0,5 - 15 mm/rev
Number of metric pitches	55
Imperial pitch	60 – 2 Gg/1"
Number of imperial pitches	55
Diametrical pitch	120 – 4 Gg/π
Number of diametrical pitches	55
Modular thread pitch	0,25 – 7,5 mm x π
Number of modular thread pitches	55

Speed range
Number of gears	12
Speed range	30 – 1500 min¯¹

Spindle
Spindle chuck	Camlock DIN ISO 702-2 No. 8
Spindle bore/rod passage diameter	80 mm
Spindle cone	MT 7

Tailstock
Chuck	MT5
Quill stroke	180 mm
Quill diameter	72 mm

Travel
Travel upper slide	170 mm
Travel cross slide	350 mm
Travel carriage saddle	1400 mm

Work areas
Max. height	260 mm
Max. width	1600 mm
Swing diameter above machine bed	520 mm
Swing diameter above planing slide	324 mm
Turning length in bed bridge	780 mm
Bed width	350 mm

VPE

Unit: pc(s).
Packaging unit: 1

Three jaw chucks
Reduction sleeve MK 7 / MK 5
Fixed center point MK 5 long
Fixed centering point MK 5 short
Quick change steel holder SWH 7-C (TX 5216)
Quick change steel holder SWH 7-C (TX 6222)
Steel holder 25 x 120 type D for square chisels
operating tool

Digital position indicator

DPA 32

If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.